OpenBSD 3.8-beta (prowl) #3: Wed Aug 24 05:45:41 GMT+8 2005
    root@prowl.local.net:/usr/src/sys/arch/i386/compile/prowl
cpu0: Intel(R) Celeron(TM) CPU 1000MHz ("GenuineIntel" 686-class) 1.20 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem  = 259563520 (253480K)
avail mem = 232767488 (227312K)
using 3194 buffers containing 13082624 bytes (12776K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(73) BIOS, date 08/16/02, BIOS32 rev. 0 @ 0xfaa50
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xd4a4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd420/128 (6 entries)
pcibios0: PCI Exclusive IRQs: 3 7 9 11
pcibios0: PCI Interrupt Router at 000:07:0 (vendor 0x1106 product 0x0596 rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor 0x1106 product 0x0601 rev 0x05
ppb0 at pci0 dev 1 function 0 vendor 0x1106 product 0x8601 rev 0x00
pci1 at ppb0 bus 1
vga0 at pci1 dev 0 function 0 vendor 0x1023 product 0x8500 rev 0x6a
wsdisplay0 at vga0 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 vendor 0x1106 product 0x0686 rev 0x40
pciide0 at pci0 dev 7 function 1 vendor 0x1106 product 0x0571 rev 0x06: ATA100, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD600BB-00JHA0>
wd0: 16-sector PIO, LBA, 57241MB, 117231408 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-ROM CR-589, GS0M> SCSI0 5/cdrom removable
cd0(pciide0:1:1): using PIO mode 4, DMA mode 2
vendor 0x1106 product 0x3038 (class serial bus subclass USB, rev 0x1a) at pci0 dev 7 function 2 not configured
viaenv0 at pci0 dev 7 function 4 vendor 0x1106 product 0x3057 rev 0x40
siop0 at pci0 dev 10 function 0 vendor 0x1000 product 0x0001 rev 0x02: irq 11
scsibus1 at siop0: 8 targets
st0 at scsibus1 targ 4 lun 0: <SONY, SDT-7000, 0300> SCSI2 1/sequential removable
st0: drive empty or not ready
rl0 at pci0 dev 13 function 0 vendor 0x10ec product 0x8139 rev 0x10: irq 7 address 00:20:ed:2e:3a:91
rlphy0 at rl0 phy 0: RTL internal phy
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
sb1 at isapnp0 "Creative SB32 PnP, CTL0031, , Audio" port 0x220/16,0x330/2,0x388/4 irq 5 drq 1,5: dsp v4.13
midi0 at sb1: <SB MPU-401 UART>
audio0 at sb1
opl0 at sb1: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
wdc2 at isapnp0 "Creative SB32 PnP, CTL2011, PNP0600, IDE" port 0x168/8,0x36e/2 irq 10
"Creative SB32 PnP, CTL0021, , WaveTable" at isapnp0 port 0x620/4 not configured
joy0 at isapnp0 "Creative SB32 PnP, CTL7001, PNPB02F, Game" port 0x200/8
"Creative SB32 PnP, CTL0051, , StereoEnhance" at isapnp0 port 0x100/1 not configured
biomask ef5d netmask efdd ttymask ffdf
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302