Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.0 (pecker) #0: Sun Jun 15 23:21:11 EST 2008 uridium@c_node4.local.net:/usr/src/sys/arch/i386/compile/pecker total memory = 511 MB rbus: rbus_min_start set to 0x40000000 avail memory = 497 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 BIOS32 rev. 0 found at 0xeca00 mainbus0 (root) cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel Pentium III (686-class), 932.71 MHz, id 0x686 cpu0: features 383fbff cpu0: features 383fbff cpu0: features 383fbff cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way cpu0: L2 cache 256 KB 32B/line 8-way cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way cpu0: calibrating local timer cpu0: apic clock running at 132 MHz cpu0: 8 page colors ioapic0 at mainbus0 apid 8 (I/O APIC) ioapic0: pa 0xfec00000, version 11, 16 pins ioapic0: misconfigured as apic 0 ioapic0: remapped to apic 8 ioapic1 at mainbus0 apid 3 (I/O APIC) ioapic1: pa 0xfec01000, version 11, 16 pins ioapic1: misconfigured as apic 0 ioapic1: remapped to apic 3 acpi0 at mainbus0: Advanced Configuration and Power Interface acpi0: using Intel ACPI CA subsystem version 20060217 acpi0: X/RSDT: OemId , AslId < ,00000000> acpi0: SCI interrupting at int 9 timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 ACPI-Safe 32-bit timer ACPI Object Type 'Processor' (0x0c) at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured npx1 at acpi0 (PNP0C04) npx1: io 0xf0-0xff irq 13 npx1: reported by CPUID; using exception 16 attimer1 at acpi0 (PNP0100): AT Timer attimer1: io 0x40-0x43 irq 0 PNP0200 [AT DMA Controller] at acpi0 not configured PNP0B00 [AT Real-Time Clock] at acpi0 not configured pcppi1 at acpi0 (PNP0800) pcppi1: io 0x61 pcppi1: children must have an explicit unit midi0 at pcppi1: PC speaker (CPU-intensive output) sysbeep0 at pcppi1 pckbc1 at acpi0 (PNP0303): kbd port pckbc1: io 0x60,0x64 irq 1 PNP0501 [16550A-compatible COM port] at acpi0 not configured PNP0700 [PC standard floppy disk controller] at acpi0 not configured PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured acpibut0 at acpi0 (PNP0C0C): ACPI Power Button PNP0C01 [System Board] at acpi0 not configured pcppi1: attached to attimer1 pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc1 (aux slot) pckbc1: unable to establish interrupt for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: ServerWorks CNB20-HE PCI/AGP bridge (rev. 0x05) pchb1 at pci0 dev 0 function 1 pchb1: ServerWorks CNB20-HE PCI/AGP bridge (rev. 0x05) pci1 at pchb1 bus 1 pci1: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok ppb0 at pci1 dev 1 function 0: Intel product 0x0960 (rev. 0x05) pci2 at ppb0 bus 2 pci2: i/o space, memory space enabled, rd/line, wr/inv ok vga1 at pci2 dev 0 function 0: ATI Technologies 3D Rage IIC (rev. 0x7a) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 Intel ROB-in i960RP Microprocessor (miscellaneous memory, revision 0x05) at pci1 dev 1 function 1 not configured fxp0 at pci1 dev 3 function 0: i82559 Ethernet, rev 8 fxp0: interrupting at ioapic1 pin 5 (irq 11) fxp0: Ethernet address 00:50:8b:e8:36:4b inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1 at pci1 dev 4 function 0: i82559 Ethernet, rev 8 fxp1: interrupting at ioapic1 pin 6 (irq 11) fxp1: Ethernet address 00:50:8b:e8:36:4d inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto cmdide0 at pci1 dev 5 function 0 cmdide0: CMD Technology PCI0649 (rev. 0x02) cmdide0: bus-master DMA support present cmdide0: primary channel configured to native-PCI mode cmdide0: using ioapic1 pin 4 (irq 3) for native-PCI interrupt atabus0 at cmdide0 channel 0 cmdide0: secondary channel configured to native-PCI mode atabus1 at cmdide0 channel 1 ATI Technologies Rage XL (VGA display, revision 0x27) at pci0 dev 2 function 0 not configured Compaq Advanced Systems Management Controller (miscellaneous system) at pci0 dev 3 function 0 not configured pcib0 at pci0 dev 15 function 0 pcib0: ServerWorks OSB4 southbridge (rev. 0x51) rccide0 at pci0 dev 15 function 1 rccide0: ServerWorks OSB4 IDE Controller (rev. 0x00) rccide0: bus-master DMA support present rccide0: primary channel configured to compatibility mode rccide0: primary channel interrupting at ioapic0 pin 14 (irq 14) atabus2 at rccide0 channel 0 rccide0: secondary channel configured to compatibility mode rccide0: secondary channel interrupting at ioapic0 pin 15 (irq 15) atabus3 at rccide0 channel 1 ohci0 at pci0 dev 15 function 2: ServerWorks OSB4/CSB5 USB Host Controller (rev. 0x04) ohci0: interrupting at ioapic1 pin 7 (irq 5) ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: ServerWorks OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered isa0 at pcib0 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 isapnp0: no ISA Plug 'n Play devices found ioapic0: enabling ioapic1: enabling timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec Kernelized RAIDframe activated wd0 at atabus0 drive 0: wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 19092 MB, 38792 cyl, 16 head, 63 sec, 512 bytes/sect x 39102336 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(cmdide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) atapibus0 at atabus3: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2 cd0(rccide0:1:0): using PIO mode 4, DMA mode 2 (using DMA) boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)