Stereo auich0: ac97: ext id 1 isa0 at pcib0 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 isapnp0: no ISA Plug 'n Play devices found ioapic0: enabling timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 auich0: measured ac97 link rate at 55051 Hz, will use 55000 Hz audio0 at auich0: full duplex, mmap, independent fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec Kernelized RAIDframe activated uhidev0 at uhub0 port 1 configuration 1 interface 0 uhidev0: Kensington Kensington USB/PS2 Trackball, rev 1.10/1.11, addr 2, iclass 3/1 ums0 at uhidev0: 11 buttons and Z dir. wsmouse0 at ums0 mux 0 wd0 at atabus0 drive 0: wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 19092 MB, 38792 cyl, 16 head, 63 sec, 512 bytes/sect x 39102336 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) atapibus0 at atabus1: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) syncing disks... 2 done unmounting file systems...Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.0.1 (GENERIC) #0: Tue Oct 7 22:58:48 PDT 2008 builds@wb30:/home/builds/ab/netbsd-4-0-1-RELEASE/i386/200810080053Z-obj/home/builds/ab/netbsd-4-0-1-RELEASE/src/sys/arch/i386/compile/GENERIC total memory = 1023 MB rbus: rbus_min_start set to 0x40000000 avail memory = 995 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 BIOS32 rev. 0 found at 0xeaa30 mainbus0 (root) cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel Pentium 4 (686-class), 1595.41 MHz, id 0xf12 cpu0: features 3febfbff cpu0: features 3febfbff cpu0: features 3febfbff cpu0: "Intel(R) Pentium(R) 4 CPU 1.60GHz" cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way cpu0: L2 cache 256 KB 64B/line 8-way cpu0: ITLB 4K/4M: 64 entries cpu0: DTLB 4K/4M: 64 entries cpu0: using thermal monitor 1 cpu0: calibrating local timer cpu0: apic clock running at 99 MHz cpu0: 8 page colors ioapic0 at mainbus0 apid 8 (I/O APIC) ioapic0: pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0 ioapic0: remapped to apic 8 acpi0 at mainbus0: Advanced Configuration and Power Interface acpi0: using Intel ACPI CA subsystem version 20060217 acpi0: X/RSDT: OemId , AslId < ,00000000> acpi0: SCI interrupting at int 9 acpi0: fixed-feature power button present timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 ACPI-Fast 24-bit timer mpacpi: could not get bus number, assuming bus 0 ACPI Object Type 'Processor' (0x0c) at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured npx1 at acpi0 (PNP0C04) npx1: io 0xf0-0xff irq 13 npx1: reported by CPUID; using exception 16 PNP0000 [AT Interrupt Controller] at acpi0 not configured attimer1 at acpi0 (PNP0100): AT Timer attimer1: io 0x40-0x43 irq 0 PNP0200 [AT DMA Controller] at acpi0 not configured PNP0B00 [AT Real-Time Clock] at acpi0 not configured pcppi1 at acpi0 (PNP0800) pcppi1: io 0x61 pcppi1: children must have an explicit unit midi0 at pcppi1: PC speaker (CPU-intensive output) sysbeep0 at pcppi1 pckbc1 at acpi0 (PNP0F13): aux port pckbc1: irq 12 pckbc2 at acpi0 (PNP0303): kbd port pckbc2: io 0x60,0x64 irq 1 PNP0501 [16550A-compatible COM port] at acpi0 not configured PNP0700 [PC standard floppy disk controller] at acpi0 not configured PNP0003 [APIC] at acpi0 not configured PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured acpibut0 at acpi0 (PNP0C0C): ACPI Power Button PNP0C01 [System Board] at acpi0 not configured pcppi1: attached to attimer1 pckbd0 at pckbc2 (kbd slot) pckbc2: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: Intel 82845 Host (rev. 0x03) agp0 at pchb0: aperture at 0xd0000000, size 0x10000000 ppb0 at pci0 dev 1 function 0: Intel 82845 AGP (rev. 0x03) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled vga1 at pci1 dev 0 function 0: ATI Technologies Radeon 9200SE 5964 (rev. 0x01) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 ppb1 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0x12) pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled fxp0 at pci2 dev 8 function 0: unable to map device registers rtk0 at pci2 dev 9 function 0: Realtek 8139 10/100BaseTX (rev. 0x10) rtk0: interrupting at ioapic0 pin 18 (irq 10) rtk0: Ethernet address 00:40:f4:2b:99:c0 rlphy0 at rtk0 phy 7: Realtek internal PHY rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcib0 at pci0 dev 31 function 0 pcib0: Intel 82801BA LPC Interface Bridge (rev. 0x12) piixide0 at pci0 dev 31 function 1 piixide0: Intel 82801BA IDE Controller (ICH2) (rev. 0x12) piixide0: bus-master DMA support present piixide0: primary channel wired to compatibility mode piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14) atabus0 at piixide0 channel 0 piixide0: secondary channel wired to compatibility mode piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15) atabus1 at piixide0 channel 1 uhci0 at pci0 dev 31 function 2: Intel 82801BA USB Controller (rev. 0x12) uhci0: interrupting at ioapic0 pin 19 (irq 11) usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 31 function 4: Intel 82801BA USB Controller (rev. 0x12) uhci1: interrupting at ioapic0 pin 23 (irq 10) usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered auich0 at pci0 dev 31 function 5: i82801BA (ICH2) AC-97 Audio auich0: interrupting at ioapic0 pin 17 (irq 11) auich0: ac97: Analog Devices AD1885 codec; headphone, Analog Devices Phat Stereo auich0: ac97: ext id 1 isa0 at pcib0 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 isapnp0: no ISA Plug 'n Play devices found ioapic0: enabling timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 auich0: measured ac97 link rate at 55095 Hz, will use 55000 Hz audio0 at auich0: full duplex, mmap, independent fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec Kernelized RAIDframe activated uhidev0 at uhub0 port 1 configuration 1 interface 0 uhidev0: Kensington Kensington USB/PS2 Trackball, rev 1.10/1.11, addr 2, iclass 3/1 ums0 at uhidev0: 11 buttons and Z dir. wsmouse0 at ums0 mux 0 wd0 at atabus0 drive 0: wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 19092 MB, 38792 cyl, 16 head, 63 sec, 512 bytes/sect x 39102336 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) atapibus0 at atabus1: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) syncing disks... 2 done unmounting file systems...Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.0.1 (GENERIC) #0: Tue Oct 7 22:58:48 PDT 2008 builds@wb30:/home/builds/ab/netbsd-4-0-1-RELEASE/i386/200810080053Z-obj/home/builds/ab/netbsd-4-0-1-RELEASE/src/sys/arch/i386/compile/GENERIC total memory = 1023 MB rbus: rbus_min_start set to 0x40000000 avail memory = 995 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 BIOS32 rev. 0 found at 0xeaa30 mainbus0 (root) cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel Pentium 4 (686-class), 1595.42 MHz, id 0xf12 cpu0: features 3febfbff cpu0: features 3febfbff cpu0: features 3febfbff cpu0: "Intel(R) Pentium(R) 4 CPU 1.60GHz" cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way cpu0: L2 cache 256 KB 64B/line 8-way cpu0: ITLB 4K/4M: 64 entries cpu0: DTLB 4K/4M: 64 entries cpu0: using thermal monitor 1 cpu0: calibrating local timer cpu0: apic clock running at 99 MHz cpu0: 8 page colors ioapic0 at mainbus0 apid 8 (I/O APIC) ioapic0: pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0 ioapic0: remapped to apic 8 acpi0 at mainbus0: Advanced Configuration and Power Interface acpi0: using Intel ACPI CA subsystem version 20060217 acpi0: X/RSDT: OemId , AslId < ,00000000> acpi0: SCI interrupting at int 9 acpi0: fixed-feature power button present timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 ACPI-Fast 24-bit timer mpacpi: could not get bus number, assuming bus 0 ACPI Object Type 'Processor' (0x0c) at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured npx1 at acpi0 (PNP0C04) npx1: io 0xf0-0xff irq 13 npx1: reported by CPUID; using exception 16 PNP0000 [AT Interrupt Controller] at acpi0 not configured attimer1 at acpi0 (PNP0100): AT Timer attimer1: io 0x40-0x43 irq 0 PNP0200 [AT DMA Controller] at acpi0 not configured PNP0B00 [AT Real-Time Clock] at acpi0 not configured pcppi1 at acpi0 (PNP0800) pcppi1: io 0x61 pcppi1: children must have an explicit unit midi0 at pcppi1: PC speaker (CPU-intensive output) sysbeep0 at pcppi1 pckbc1 at acpi0 (PNP0F13): aux port pckbc1: irq 12 pckbc2 at acpi0 (PNP0303): kbd port pckbc2: io 0x60,0x64 irq 1 PNP0501 [16550A-compatible COM port] at acpi0 not configured PNP0700 [PC standard floppy disk controller] at acpi0 not configured PNP0003 [APIC] at acpi0 not configured PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured acpibut0 at acpi0 (PNP0C0C): ACPI Power Button PNP0C01 [System Board] at acpi0 not configured pcppi1: attached to attimer1 pckbd0 at pckbc2 (kbd slot) pckbc2: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: Intel 82845 Host (rev. 0x03) agp0 at pchb0: aperture at 0xd0000000, size 0x10000000 ppb0 at pci0 dev 1 function 0: Intel 82845 AGP (rev. 0x03) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled vga1 at pci1 dev 0 function 0: ATI Technologies Radeon 9200SE 5964 (rev. 0x01) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 ppb1 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0x12) pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled fxp0 at pci2 dev 8 function 0: unable to map device registers rtk0 at pci2 dev 9 function 0: Realtek 8139 10/100BaseTX (rev. 0x10) rtk0: interrupting at ioapic0 pin 18 (irq 10) rtk0: Ethernet address 00:40:f4:2b:99:c0 rlphy0 at rtk0 phy 7: Realtek internal PHY rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcib0 at pci0 dev 31 function 0 pcib0: Intel 82801BA LPC Interface Bridge (rev. 0x12) piixide0 at pci0 dev 31 function 1 piixide0: Intel 82801BA IDE Controller (ICH2) (rev. 0x12) piixide0: bus-master DMA support present piixide0: primary channel wired to compatibility mode piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14) atabus0 at piixide0 channel 0 piixide0: secondary channel wired to compatibility mode piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15) atabus1 at piixide0 channel 1 uhci0 at pci0 dev 31 function 2: Intel 82801BA USB Controller (rev. 0x12) uhci0: interrupting at ioapic0 pin 19 (irq 11) usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 31 function 4: Intel 82801BA USB Controller (rev. 0x12) uhci1: interrupting at ioapic0 pin 23 (irq 10) usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered auich0 at pci0 dev 31 function 5: i82801BA (ICH2) AC-97 Audio auich0: interrupting at ioapic0 pin 17 (irq 11) auich0: ac97: Analog Devices AD1885 codec; headphone, Analog Devices Phat Stereo auich0: ac97: ext id 1 isa0 at pcib0 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 isapnp0: no ISA Plug 'n Play devices found ioapic0: enabling timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 auich0: measured ac97 link rate at 55051 Hz, will use 55000 Hz audio0 at auich0: full duplex, mmap, independent fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec Kernelized RAIDframe activated uhidev0 at uhub0 port 1 configuration 1 interface 0 uhidev0: Kensington Kensington USB/PS2 Trackball, rev 1.10/1.11, addr 2, iclass 3/1 ums0 at uhidev0: 11 buttons and Z dir. wsmouse0 at ums0 mux 0 wd0 at atabus0 drive 0: wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 19092 MB, 38792 cyl, 16 head, 63 sec, 512 bytes/sect x 39102336 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) atapibus0 at atabus1: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)